
Manufacturer part no. 00313611
Listed by betafpv at €60.66. Delivered to France, including shipping, VAT and any customs duty, it comes to about €90.79. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €60.66 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €15.13 |
| Total delivered | €90.79 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 90 g |
The RunCam Split 3 Nano, Ultra-low weight 10g, gives you 1080p/60fps HD recording while also utilizing a sharp WDR FPV camera. Betafpv customized shorter RunCam lens length for Canopy, which can prevent lens damage during flight. The Runcam Split 3 Nano Camera is used on HX115 HD Toothpick Drone. Features 1080P/60fps HD recording & WDR FPV camera Low latency TV-OUT (40MS) Power-off protection for video files Wide voltage (5-20V) FPV aspect ratio 16:9/4:3 switchable Stronger flexible ribbon cable Optimize TV-OUT interference to reduce ripple Specifications of Camera Field of View(FOV): Recording FOV: 165°; FPV FOV: 165°@16:9, 130°@4:3 Video Resolution: 1080@60fps / 1080@50fps / 1080@30fps / 720@60fps Video File Format: MOV Image Resolution: 2 MP TV Mode: NTSC (720*480) / PAL (720*576) Switchable Interface: JST 1.25mm / UART Max Micro SD Card Supported: 64G(need Class 6 or above, recommend Class 10 / UHS-I / UHS-II / UHS-III) Hole Distance of Installation: 25*25mm Dimensions: PCB 29*29mm / Lens Module 14*14mm Power Input: DC 5-20V(Non-direct power supply from battery. Powered direcly with battery will generate surges and burn the camera.) Working Current: 650mA @5V / 270mA @12V Weight: 10g Package 1 * Customized Runcam Split 3 Nano Camera 1 * Runcam OSD board and cable 1 * Set of M2 screws


