Manufacturer part no. 00313057
Listed by betafpv at €5.19. Delivered to France, including shipping, VAT and any customs duty, it comes to about €24.23. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €5.19 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €4.04 |
| Total delivered | €24.23 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| KV | 15 000 rpm/V |
| Weight | 65 g |
| Dimensions | 8x20mm |
Inductrix FPV+ Version These 8mm motors are just customed for Blade Inductrix FPV Plus. No need to swap the wires around on the connectors. Compared with other motors like CL-8020-14 from MMW, the biggest improvement is that it has the same polarity as the stock motors and you do not need to do any modify in the motors or FC board. Tips: the KV value of the stock motors in Inductrix FPV Plus is about 13800KV. Here is a discussion on FB. The 14000KV 8x20mm motors for Blade Inductrix FPV+ drone are out of stock nowadays. You could choose the 15000KV version for whoop style FC board and swap the wires by yourself. Whoop Style Version This version is compared to the Inductrix FPV+ version, they have different motor polarity order. If you are using a whoop style FC with Betaflight firmware, please choose this version. If you get a set of motors with wrong connector polarity, here is some tips for you to swap the wires around the connectors. Recommend Parts Frame: Beta75S frame Motors: 8x20mm 14000KV motors Frames: 40mm 3-blades props / 40mm 4-blades props Bullet Point Just for Blade Inductrix Plus. Basic Edition 14000KV / 52,000 [email protected] Motor Diameter: 8mm, Motor Length: 20mm, With 1.25mm JST Plug Weight: about 3.5g Size comparison of all brushed whoop motors from BETAFPV. 6x15 (17500KV) 6x15 (19500KV) 7x16 (17500KV) 7x20 (17500KV) 8x20 (14000KV) Specification motor diameter: 8mm motor length: 20mm shaft diameter: 1.0mm cable length: 56mm weight: about 3.5g no load speed: 56,000 rpm at 3.7V motor wire: clockwise motor(with red blue), anti-clockwise motor(with black white) connector: JST 1.25mm plug Package 2 * 8x20mm 15000KV motor (CW) 2 * 8x20mm 15000KV motor (CCW)
