holybroHolybro
SiK Telemetry Radio V3
Manufacturer part no. 17012
$58.99≈ 51.12 €
Price summary
Listed by holybro at €51.12. Delivered to France, including shipping, VAT and any customs duty, it comes to about €79.34. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock
Estimated landed cost
| Item | €51.12 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €13.22 |
| Total delivered | €79.34 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 120 g |
Description
Overview This Holybro SiK Telemetry Radio is a small, light, and inexpensive open-source radio platform that typically allows ranges of better than 300m “out of the box” (the range can be extended to several kilometres with the use of a patch antenna on the ground). This radio is plug-n-play, ready for all Pixhawk Standard and other flight controllers, providing the easiest way to set up a telemetry connection between your Flight Controller and a ground station. It uses open-source firmware that has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Ardupilot, QGroundControl, PX4, and Flight Controller. The radios can be either 915 MHz or 433 MHz, and you should purchase the model that is appropriate for your country/region. Features Open-source SIK firmware Plug-n-play for Pixhawk Standard Flight Controllers The Easiest way to connect your Flight Controller and Ground Station Interchangeable air and ground radio Micro-USB port (Type-C Adapter Cable Included) 6-position JST-GH connector Specifications SiK Telemetry Radio 100mW SiK Telemetry Radio 500mW SiK Telemetry Radio 1W Max RF Power 20 dBm 27 dBm 30 dBm Receive sensitivity -121 dbm @2kbps RF Data Rate, -105 dbm @64kbps RF Data Rate Antenna Gain 2dBi 5dBi RF Data Rates 2, 4, 8, 16, 32, 64(default), 96, 128, 192, 250 kbps Serial Interface Data Rate 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6(default), 115.2 kbps Frequency Band 902MHz - 928MHz or 414MHz - 460MHz Interference Immunity Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle Address Options Network ID: 0 –255 Channels Up to 50 Frequency Hopping Channels Supported Network Topologies Point-to-point Configuration Method MissionPlanner or AT Commands Data Framing Standard or MAVLink protocol framing Error correction Corrects up to 25% of bit errors with open-source SIK firmware Serial Data Connector & Interface 6-pin JST-GH connector, 3.3V-TTL USB Micro-USB Type-C SMA Connector RP-SMA female Power C
