holybroHolybro· Robots & kits
Kopis CineWhoop 3"
Manufacturer part no. 30065
$292.99≈ 253.91 €
Price summary
Listed by holybro at €253.91. Delivered to France, including shipping, VAT and any customs duty, it comes to about €322.69. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €253.91 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €53.78 |
| Total delivered | €322.69 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 500 g |
Description
Updated: 1.FC:Kakute H7 V1.3 2.Digital HD Camera(HD version):Caddx Nebula Pro Vista Kit Digital HD FPV system 3.ESC:Tekko32 F4 4in1 mini 50A ESC Specifications FC: Kakute H7 V1.3 MCU - STM32H743 32-bit processor running at 480 MHz IMU - MPU6000 Barometer - BMP280 OSD - AT7456E Onboard Bluetooth chip - ESP32-C3 SpeedyBee IOS & Android App Compatible Note: The Bluetooth onboard is set to automatically turn off when the flight controller is unlocked (arm) and turn on automatically when the flight controller is locked (disarm) in Betaflight 6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry) 9x PWM Outputs (8 Motor Output, 1 LED) 2x JST-SH1.0 8pin ESC port (4in1 ESCs, x8/Octocopter compatible) 1x JST-SH1.0 6pin VTX port (For HD System like Caddx Vista & Air Unit) Battery input voltage: 3S - 8S BEC 5V 2A Cont. BEC 9V 3A Cont USB Type-C Mounting - 30.5 x 30.5mm/Φ4mm hole with Φ3mm Grommets Dimension - 35x35mm Weight - 8g ESC: Tekko32 F4 4in1 50A mini ESC F4 MCU with BLHELI32 firmware Continuous Current: 50A x4 Burst Current: 60A x4 Battery Supports: 4-6S PWM Frequency: 16k to 96k Supports DShot 150/300/600/1200/2400 Supports MultiShot/OneShot/Proshot/PWM etc. ESC telemetry Supported Onboard analog current sensor BLHeli_32 firmware 1000uf 35v capacitor included (highly recommended for 6s setup) Mounting holes: 3.6mm @ 20x20mm, compatible with either M2& M3 Rubber Gourmet (Included) Dimension: 32 x 40 mm Analog version #30065,30066 VTx:Atlatl HV V2 FPV camera:Foxeer Micro FPV Camera Weight:237g Recommend battery: 650mah~1300mah 4s Includes: 1x Kopis CineWhoop FPV racing drone 4x T3140 Propeller 2x Battery strap(installed) HD version #30126,#30113 VTx:Caddx Nebula Pro Vista Kit Digital HD FPV system(Optional) Weight:254g（included Nebula Pro Vista Kit） Recommend battery: 650mah~1300mah 4s Includes: 1x Kopis CineWhoop FPV racing drone Caddx Nebula Pro Vista Kit Digital HD FPV system(Optional) 4x T3140 Propeller 2x Battery strap(installed) Please note: Starting from A
