holybroHolybro
RadioMaster R81 Receiver
Manufacturer part no. 31106
$17.99≈ 15.59 €
Price summary
Listed by holybro at €15.59. Delivered to France, including shipping, VAT and any customs duty, it comes to about €36.71. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock
Estimated landed cost
| Item | €15.59 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €6.12 |
| Total delivered | €36.71 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Price history
3 price/stock records since 8/20/2026
Specifications (automatically extracted)
Mechanical
| Weight | 50 g |
Description
Note: This R81 receiver ships with a Dupont connector pre-soldered. To use with Pixhawk 6X, 6C & Mini, and Pix32 V6. Please connect to the Dupont connector by using the cable provided in the Flight Controller's cable set. See photos for more details. The receiver LED will not light up when powered without being bound to a remote controller. Specifications Channels: 8CH Frequency range: 2400-2483.5Mhz Power input range: 4.5-6V Signal format: FrSky D8 Compatible Output format: SBUS (Inverted) Support return: support return RSSI Control distance: more than 1km Antenna length: approximately 6cm Size: 17*11 mm Weight: 2g Includes 1x RadioMaster R81 SBUS D8 2.4GHz Nano Receiver (pre-soldered with 3-pin female Dupont connector) 2x spare heatshrink tube 1x 3-pin male Dupont connector Bind method: 1. Press and hold the BIND button on the receiver then connect power. After approximately 3 seconds, the receiver LED will be RED, the receiver is now in bind mode 2. Select the D8 protocol for the multi-protocol menu of your remote control, and press the [BIND] option, the red light of the receiver will flash indicating successful bind 3. Exit bind mode on your remote control and disconnect power to the receiver then power the receiver once more. The LED will now be solid RED indicated the bind is now done. If not please repeat steps 1 and 2 Fail-safe Protection: 1. Press the BIND button once within 10 seconds of the receiver being powered on, and the receiver will save all the current channel values of the remote control as the fail-safe value 2. 10 seconds after the receiver is powered on, the BIND button function will be disabled to prevent accidental changes to the fail-safe settings while preparing the model for flight RSSI output: This receiver has a total of 9 channels. 8 channels + an RSSI output channel. Channels 1-8 are controlled by the remote controller, the 9th channel is the signal strength RSSI value output by the receiver itself, which can be read by the flight con
