racedayquadsCubePilot
CubePilot The CubeOrange+
Manufacturer part no. 22371
$307.01≈ 266.06 €
Price summary
Listed by racedayquads at €266.06. Delivered to France, including shipping, VAT and any customs duty, it comes to about €337.27. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €266.06 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €56.21 |
| Total delivered | €337.27 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 36 g |
Description
The CubeOrange+ is an advanced flight controller autopilot module. This is the Cube only and needs to be paired with a carrier board. The CubeOrange+, developed by CubePilot, is equipped with a high-performance STM32H743 ARM Cortex-M7 processor and supports ArduPilot firmware for seamless integration into drones, UAVs, and robotic systems. Check out all our stacks & combos! Features Two vibration-isolated IMUs to reduce frame vibration effects Temperature-controlled IMUs for optimal performance Compact all-in-one FMU and IMU (Cube form factor) 80-pin DF17 connector for plug-and-play integration Custom carrier board support for manufacturers Faster STM32H757 H7 processor with 1MB RAM Compatible with CubePilot carrier boards Triple redundant IMU sensors Specifications IMU & Compasses 3 IMUs total: 2 on IMU board, 1 on FMU (all Cubes) 2 onboard compasses: 1 on IMU board, 1 on FMU (Cube Black, Green, Blue) 1 onboard compass (CubeOrange, Yellow) Barometers Three redundant IMUs (accels, gyros, and compass) Two redundant barometers Power System Dual power input (all Cubes) Redundancy from servo rail removed; now uses second dedicated power plug Zener diode and FET for Aux input 2 over-voltage protection Power protection available only on "PRO" carrier board Mini carrier board still uses servo rail for backup power I2C & External Devices Dual external I2C ports (all Cubes) Supports two GPS/Mag units without interference Power Monitoring Power monitoring routed to I/O chip for in-flight power event logging Brick OK, Backup OK, and FMU 3.3V monitored via 220Ω resistor to I/O pin I/O Ports & Connectivity 14 PWM outputs: 8 from I/O, 6 from FMU Inputs for CPPM, Spektrum/DSM, and S.Bus Analog/PWM RSSI input S.Bus servo output 5 serial ports (2 with flow control) 2 I2C ports 1 SPI port (un-buffered, short cable use only) 2 CAN Bus interfaces CAN FD interface on Cube BlueH7 and Orange 3 analog inputs High-powered piezo buzzer driver (on expansion board) High-power RGB LED (external
Similar products
racedayquadsIn stock
SkyStarsRC F7 Mini HD Pro 3-6S 20x20 Flight Controller
€59.81$69.01
View at seller ↗
racedayquadsIn stock
SkyStarsRC H7 Single Gyro 2-6S 30x30 Flight Controller
€76.82$88.64
View at seller ↗
