
Manufacturer part no. 22953
Listed by racedayquads at €111.37. Delivered to France, including shipping, VAT and any customs duty, it comes to about €151.64. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €111.37 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €25.27 |
| Total delivered | €151.64 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Current | 45 A |
| Weight | 54 g |
The GOKU GN745 AIO has been Flywoo's flagship AIO, and now the V3 has arrived! Upgraded with a two-in-one ESC drive solution, it delivers 45A continuous current and has bigger solder pads, handling a variety of drones and flight styles! The V3 also adds four direct-plug UART ports and a Type-C interface for greater convenience and seamless connectivity. Look at our other Whoop/AIO Flight Controllers, as well as the rest of our Flywoo selection. Note: Gyro changed from MPU6000 to ICM42688. Features Improved Layout Better Protection Type-C Interface Plug & Play Specifications USB VCP Driver: All UARTs usable simultaneously (USB does not occupy a UART) Receiver Support: Serial receivers only (SBUS, iBus, Spektrum, Crossfire) Receiver Limitations: PPM and PWM receivers are not supported Mounting Holes: Standard 25.5/26.5mm (center to center) MCU: STM32F745 32-bit processor, 216MHz, 1MB Flash BF Flight Controller Firmware: FLYWOOF745AIO Hardware UARTs: 7 (UART1, 2, 3, 4, 5, 6, 7) Ardupilot Firmware: FLYWOOF745 Blackbox Storage: Onboard 16MB INAV Firmware: FLYWOOF745 Dimensions: 33.5 x 33.5mm IMU: ICM42688 Barometer: SPL06 Weight: 9.4g Power Output: 3.3V: 0.5A max 5V: 2.0A max Includes 1x Flywoo GOKU GN745 V3 AIO - F7 FC + 45A 2-6S AM32 4-in-1 ESC - ICM42688 - 25X25 1x UNICON UPL Capacitor 25V 470UF 1x VTX & Camera Connection Cable 1x GPS Compass Connection Cable 4x M2x6.6 Shock-Absorbing Ball 1x Receiver Connection Cable 1x DJI O3 Connection Cable 1x XT30 Power Cable 4x M2 Rubber Ring



