
Manufacturer part no. 22458
Listed by racedayquads at €80.43. Delivered to France, including shipping, VAT and any customs duty, it comes to about €114.52. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €80.43 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €19.09 |
| Total delivered | €114.52 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 14 g |
Another feature-packed board from Matek in the 30x30 class. Loaded with features for digital and analog builds. Matek leads the pack when it comes to quality and performance. Weighing just 7g, it’s perfect for FPV racing and freestyle flying. A 3D step file is included for custom integration. Check out our 30x30 Flight Controllers as well as the entire Matek selection! Features On-Screen Display Compact Design Connectivity Lightweight Specifications MCU: STM32H7A3RIT6, 280MHz Cortex-M7, 1.4MB RAM, 2MB Flash Outputs: 8x PWM on 2x JST-SH1.0 8-pin connectors for 2x 4-in-1 ESCs Indicators: 3x LEDs for FC status (Blue, Red) and 3.3V indicator (Red) Connector: 1x JST-GH1.25 4-pin connector (5V/CAN-H/CAN-L/G) OSD: Digital video OSD supported by any spare UART UARTs: 6x (1, 2, 3, 4, 5, 6) with built-in inversion 4x ADC (VBAT, Current, VB2, Cur2) 11x PWM outputs 1x I2C 1x CAN Blackbox: 128MB Flash (1G-bit NAND) 9V Output: ON/OFF switchable USB Type-C: (USB 2.0) IMU: ICM42688P Baro: SPL06-001 OSD: AT7456E POWER ADC VB2 pad supports: Max. 69V (voltage divider: 1K:20K) Built-In: No Current Sensor Vbat Input: 636V (28S LiPo) BEC: 5V 2A cont. (Max. 3A) BEC: 9V 2A cont. (Max. 3A) LDO 3.3V: Max. 200mA PHYSICAL Mounting: 30.5 x 30.5mm, Φ4mm with grommets Φ3mm Dimensions: 36 x 36 x 5 mm Weight: 7g Links Flashing with STM32CubeProgrammer AdruCopter Manual AdruPlane Manual Includes 1x MATEKSYS H7A3-SLIM Flight Controller - ICM42688P - 30x30 1x JST-GH-4P to JST-GH-4P cable for CAN port, 20 cm 2x JST-SH1.0 8-pin cables, 5 cm, & 8-pin connectors 6x Silicone grommets (M4 to M3)

