Manufacturer part no. 22452
Listed by racedayquads at €43.31. Delivered to France, including shipping, VAT and any customs duty, it comes to about €69.97. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €43.31 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €11.66 |
| Total delivered | €69.97 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 50 g |
The MATEKSYS mLRS 900MHz Module Kit - mR900-30-TX offers reliable long-range communication, ideal for drone flights and remote control applications. It includes the mR900-30-TX module, IPEX MHF1 to SMA and RP-SMA adapter cables, and a 5V fan for stable operation. Note: SMA antenna and 3D-printed case not included. Check out the rest of our receivers, as well as all of our Matek selection! Features Reliable Long-Range Communication Adapter Cables Included mR900-30-TX Module Customizable Setup Cooling Fan Specifications mR900-30 915MHz RF Power: 21dBm (min) / 22dBm / 24dBm / 27dBm / 30dBm (1000mW) 868MHz RF Power: 24dBm (min) / 24dBm / 24dBm / 27dBm / 30dBm (1000mW) RF Frequency: 900MHz (868MHz, 915MHz FCC) Antenna Connector: IPEX MHF-1 to SMA STM32G431KB: mLRS firmware LoRa SX1262: TCXO PA/LNA: SKY68383-11 mRx-TX ADAPTER Fan Controller: Built-in 5V running if output power >= 500mW Power Supply: 5-13V DC @ JR_PIN3 (VIN) Bluetooth Module: Built-in HC-04 mLRS Status: Red and Green LED Modes: DFU mode and Bind One Bluetooth status: Blue LED TX2: RC IN (CRSF) Binding After powering on, press the bind button (for approximately 4 seconds) on the receiver. When in bind mode, the green and red LEDs will blink alternately at approximately 2.5 Hz. Binding Documentation Binding Manual Firmware Target: tx-matek-mr900-30-g431kb-default mLRS: Firmware Repository Includes 1x MATEKSYS mLRS 900MHz Module Kit - mR900-30-TX 1x IPEX MHF1 to RP-SMA adapter cable (5cm) 1x IPEX MHF1 to SMA adapter cable (5cm) 1x 5V Fan (25×25×10mm) with screws
