
Manufacturer part no. 20899
Listed by racedayquads at €68.06. Delivered to France, including shipping, VAT and any customs duty, it comes to about €99.67. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €68.06 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €16.61 |
| Total delivered | €99.67 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Current | 12 A |
| Weight | 18 g |
An F405 chip FC with built-in Serial ELRS receiver, 4in1 12A ESC, and 8Mbp black box. Optimized layout, supports 1-2S Lipo/LiHV. Perfect for Tinywhoop/Cinewhoop/Toothpick. Betaflight/INAV compatible. 3 sets UARTs, 5V/3A & 9V BECs, barometer. Get performance to elevate your FPV. Experience exceptional agility and power for your racing and freestyle sessions. With this board, you'll have the perfect setup to take your flight to the next level. Browse the rest of our Whoop AIO Boards and our Happymodel gear. Specifications: Brand Name: Happymodel Item Name: CrazyF405HD ELRS 1-2S AIO Flight controller Mount size: 25.5mmx25.5mm Weight: 4.8g without power lead wire Firmware target: BetaflightF4 Support 1-2S Lipo/LiHV battery FLIGHT CONTROLLER Built-in voltage meter sensor, voltage meter scale 110 Built-in current meter sensor, current meter scale 470 MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH) Power supply: 1-2S battery input (DC 2.9V-8.7V) GYRO Sensor: BMI270 (SPI connection) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Serial ExpressLRS 2.4G Model: Crazy F405 ELRS HD Built-in BMP280 Barometer Built-in 8MBp black box ONBOARD UART ELRS 2.4GHZ RECEIVER Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz Could update firmware via ExpressLRS configurator Antenna: enameled copper wire 31mm length Default firmware version: ExpressLRS V3.0.1 Firmware target: HappyModel EP 2400 RX Telemetry output Power: <12dBm RF Frequency: 2.4GHz ONBOARD 4-IN-1 ESC Current: 12A continuous peak 15A (3 seconds) Factory firmware: Bluejay ESC V0.19 Support BLHeli_S Bluejay firmware Power supply: 1-2S LiPo/LiPo HV Default protocol: DSHOT300 Firmware target: Z-H-30 *When using 1s battery and high KV 0702/0802 motors, should set the startup power to 1100/1200 Includes 1x HappyModel Crazyf405 ELRS HD 1-2S AIO Whoop/Toothpick Flight Controller w/ 12A 8Bit 4in1 ESC & ELRS 2.4GHz RX 1x Power lead with a XT30 Connector Wiring Diagram



