
Manufacturer part no. RDQ-JBF7-V2-E45S-COMBO
Listed by racedayquads at €171.18. Delivered to France, including shipping, VAT and any customs duty, it comes to about €223.42. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €171.18 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €37.24 |
| Total delivered | €223.42 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Current | 45 A |
| Weight | 77 g |
The legendary Joshua Bardwell F7 flight controller now in its V2 state takes everything great about the original JBF7 and adds a few key features that you asked for. Just like the original, it's got an F7 processor, SD card slot for black box logging, and 8 motor outputs. It's got a flexible pad layout that can handle almost any combination of peripherals you could want. Paired with this FC is the iFlight Blitz E45S 45A 2-6S ESC, An amazing 4in1 ESC that comes with a pre-soldered capacitor, big solder pads with lots of space, And a very spacious board layout to allow for easier heat dissipation. Make this stack combo the next powerhouse for any 5 inch freestyle or speedy race build!! RDQ Bardwell F7 V2 3-6S Specifications Input Voltage: 3-6S LiPo MCU: STM32F722 Gyro: BMI270 Barometer: DPS310 Power Outputs: 5V 3A, 9V 3A (w/ Pit Switch), 3.3V, vBat BF Target: JBF7 V2 UARTs: 5 (I2C SDA/SCL shared with UART 3) Plugs: 4in1 ESC, RX, Analog Cam, HD Cam, VTX, LED/Buzzer Mounting Pattern: 30.5x30.5mm Weight: 8.3g (w/ gummies & USB Protector) iFlight Blitz E45S ESC Specifications Input Voltage: 2-6S Max. Continuous Current: 45A Max. Burst Current: 55A Firmware: BLHeli_S MCU: BB21 Target: QH-40 16.7 BEC: No Telemetry Output: No Current Sensor: Yes Current Sensor Scale: 200 Dimensions 40.5x42x6.5mm Mounting Dimesions: 30.5x30.5mm Φ4mm Weight: 14.7g If you have any issues accessing the Black Box features please type out this text in the CLI to get black box data to your SD card "set sdcard_detect_inverted=on" press ENTER, then type "save" and press ENTER. Includes 1x RDQ Bardwell F7 V2 3-6S 30x30 Flight Controller 1x iFlight Blitz E45S 45A 2-6S 30x30 4in1 ESC Wiring Diagram