
Manufacturer part no. 21602
Listed by racedayquads at €33.50. Delivered to France, including shipping, VAT and any customs duty, it comes to about €58.20. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €33.50 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €9.70 |
| Total delivered | €58.20 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 14 g |
Featuring dual-channel 2.4GHz radios, the RP4TD excels in signal sensitivity, signal-to-noise ratio, and overall performance due to its optimized circuit design. The reliable DCDC power supply circuit ensures lower operating temperatures during extended usage. Additionally, the dual TCXO contributes to the utmost frequency stability and makes the RP4TD a leader in its class. The RP4TD features built in WIFI, allowing you to wirelessly upgrade firmware to configure the receiver via the built-in WebUI with your PC or mobile phone. Suitable for drones and fixed-wing models, the receiver can be installed in virtually any application that requires a serial receiver! Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories! Features Dual TCXO (temperature compensated crystal oscillator) The TCXO ensures high stability and accuracy in frequency control, compensating for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. In our testing, we found that two TCXOs offer better advantages in true diversity receivers. Specifications Item: RP4TD ExpressLRS 2.4GHz Diversity Receiver Type: ISM MCU: ESP32 RF Chip: SX1281 x 2 Antenna: 65mm 2.4GHz T Antenna x 2 Frequency Range: 2.4GHz Maximum Refresh Rate: 500Hz / F1000Hz Telemetry RF Power: Max 2x 100mW Working Voltage: DC 4.5-12.0V Weight: 1.4g (without antenna) Dimension: 23.7x16.3x4.0mm Firmware Version: ExpressLRS V3.3.0 pre-installed FW Target: RadioMaster RP4TD 2400 RX Bus interface: CRSF Extend interface: UART Includes 1x RadioMaster RP4TD ExpressLRS 2.4GHz Nano Receiver 1x CRSF wire 3x Heat-Shrinkable Tube 2x 65mm 2.4GHz T Antenna (Installed on receiver) 1x User Manual

