racedayquadsIMPULSERC· Robots & kits
ImpulseRC ApexLR EVO HD O3 Deadcat Long Range 7" Frame Kit
Manufacturer part no. 20682
$140.41≈ 121.68 €
Manufacturer part no. 20682
Listed by racedayquads at €121.68. Delivered to France, including shipping, VAT and any customs duty, it comes to about €164.02. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €121.68 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €27.34 |
| Total delivered | €164.02 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 290 g |
The ApexLR EVO 7" Frame is the ideal companion for exploration and videography that demands extra range. It has special arm geometry for motors not usually found in deadcat-style frames, and a special design that keeps the DJI O3 Air Unit and HD Camera electrically isolated. This EVO version boasts an aluminum camera mount, video isolation, and TPU inserts to fit many HD and analog cameras. Be sure to check out our 7" frame selection and all our ImpulseRC products! TENSION BRACES As prop size increases, the longer arms required cause vibration issues which negatively impact flight performance and video stability. The ApexLR EVO uses a unique tension brace design between the arms to increase stiffness and shift the resonant frequency of the assembly. Pre-loading the arms in this way allows us to keep vibration to a manageable level while still using 5.5mm thick arms for a 7" prop. The new approach saves 20g in carbon weight alone compared to equivalent 8mm thick arms. The ApexLR EVO is a variation on the typical 'dead cat' frame which have been modified to keep the front and rear motors aligned, allowing them to maintain the much loved compressed-x geometry in the motor layout. This ensures the frame remains balanced and flight characteristics are not compromised, unlike the classic 'dead cat' design which moves the rear motors closer to the body and severely impacts handling. CAMERA MOUNT Included with the ApexLR EVO is a newly redesigned aluminium camera mount and 3D printed insulation inserts. This keeps the camera firmly locked in place and reduces vibrations, whilst ensuring it is electrically isolated from the frame. With the many different HD and analog cameras on the market there is a large variation between models in the distance from the front of the lens to the mounting bolts. To give the camera the best possible protection, whilst also keeping the frame out of shot, it is critical to be able to adjust the position of the camera forwards and backwards with
