
Manufacturer part no. 20860
Listed by racedayquads at €49.49. Delivered to France, including shipping, VAT and any customs duty, it comes to about €77.39. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €49.49 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €12.90 |
| Total delivered | €77.39 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 118 g |
The SpeedyBee F405 WING APP flight controller has been tailor-made for FPV fixed-wing pilots. Its STM32 F405 MCU and ICM-42688-P IMU, 6 UARTS, and Bluetooth enable superb performance and unbeatable flying. You get top-notch features, such as OSD, a barometer and an onboard RGB battery indicator, all at an amazing price. Wireless setup is simple, and very minimal soldering is needed with all the plugin ports. It supports both INAV and Ardupilot firmware, and Ardupilot's VTOL function too! This amazing wing flight controller will allow you to use up to 11 PWM outputs to be configured for motors and servo control. Check out our other wing flight controllers, and our SpeedyBee products! Features Wireless configuration Easy installation, plug and play - no soldering needed Dual firmware support for INAV and Ardupilot Support Ardupilot's VTOL function F405 all pins break out Multilayer board design, stable operation CRSF telemetry data displayed by Lua script 4x LED strip plugs, lighting style On-board current sensor, with 3 BEC outputs Includes 90° pin headers, for lower installation height Specifications SpeedyBee F405 WING FC board MCU: STM32F405,168MHz,1MB Flash IMU(Gyro&Accelerometer: ICM-42688-P Barometer: SPL006-001 OSD Chip: AT7456E Blackbox: MicroSD Card Slot UART: 6 sets(USART1, USART2, USART3, UART4, UART5, UART6(Dedicated for Wireless board Telemetry connection)) I2C: 1x Used for magnetometer, digital airspeed sensor ADC: 4x (VBAT, Current, RSSI, Analog AirSpeed) PWM: 12x (11+1“LED”pad) ELRS/CRSF receiver: Supported,connected to UART1 SBUS: Built in inverter for SBUS input (UART2-RX) LED: 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x RGB RSSI: Supported, Named as RS . Supported FC Firmware: INAV:SpeedyBeeF405WING(default)ArduPilot: SpeedyBeeF405WING Weight: 8.9g SpeedyBee F405 WING PDB board Input voltage range: 7~36V (2~6S LiPo) Battery Voltage Sensor: Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot) Bat

