racedayquadsHAPPYMODEL
HappyModel BNF Mobula8 HD 85mm Whoop (without DJI O3 Air Unit) - ELRS 2.4GHz
Manufacturer part no. 20896
$135.65≈ 117.56 €
Price summary
Listed by racedayquads at €117.56. Delivered to France, including shipping, VAT and any customs duty, it comes to about €159.07. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €117.56 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €26.51 |
| Total delivered | €159.07 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 159 g |
Description
Please note that this version is a kit and AP! does NOT come with an O3 air unit, O3 camera and SanDisk Card. Experience powerful performance with the HappyModel BNF Mobula8 1-2S HD 85mm! This amazing quadcopter comes with Crazy F405 ELRS HD flight controller, EX1103 11000Kv motors, and Gemfan Hurricane 2023 tri-blade propellers for superior power performance. Be sure to check out all our pre-built quads, and all our Happymodel products! Specifications Item Name: Mobula8 1-2S 85mm Micro FPV whoop drone Size: 120mmx120mmx50mm Brand Name: Happymodel Wheelbase: 85mm FLIGHT CONTROLLER Built-in voltage meter sensor, voltage meter scale 110 Built-in current meter sensor, current meter scale 470 MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH) Power supply: 1-2S battery input (DC 2.9V-8.7V) GYRO Sensor: BMI270 (SPI connection) Built-in 12A(each) Blheli_S 4in1 ESC Mount hole size: 25.5mm x 25.5mm Built-in Serial ExpressLRS 2.4G Model: Crazy F405 ELRS HD Built-in BMP280 Barometer Built-in 8MBp black box ONBOARD UART ELRS 2.4GHZ RECEIVER Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz Could update firmware via ExpressLRS configurator Antenna: enameled copper wire 31mm length Default firmware version: ExpressLRS V3.0.1 Firmware target: HappyModel EP 2400 RX Telemetry output Power: <12dBm RF Frequency: 2.4GHz ONBOARD 4-IN-1 ESC Current: 12A continuous peak 15A (3 seconds) Factory firmware: Bluejay ESC V0.19 Support BLHeli_S Bluejay firmware Power supply: 1-2S LiPo/LiPo HV Default protocol: DSHOT300 Firmware target: Z-H-30 MOTORS Motor Dimension(Dia.xLen):Φ13.5mmx15.5mm Mode: EX1103 11000Kv Shaft Diameter:Φ1.5mm No.of Cells(Lipo):1-2S Configu-ration:9N12P Stator Diamter:11mm Stator Length:3mm Weight(g):3.8g PROPELLERS Center Hole Dia:1.5mm Center Thickness:5mm Props Dia:52.17mm Weight:0.88g Pitch:2.3inch Material: PC Includes 1x HappyModel BNF Mobula8 1-2S HD 85mm w/ DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz
Similar products
racedayquadsIn stock
EMAX RTF EZ Pilot Pro Analog Kit w/ Goggles, Radio Transmitter and 75mm Whoop
€287.20$331.40
View at seller ↗
racedayquadsIn stock
Flywoo BNF Firefly 2S Nano Baby 20 HD 2" Quad w/ HDZero - ELRS 2.4GHz
€371.25$428.39
View at seller ↗
racedayquadsIn stock
EMAX BNF Nanohawk 1S Brushless Analog Whoop - Choose Receiver
€160.87$185.63
View at seller ↗
racedayquadsIn stock
Flywoo BNF Firefly DC16 Nano Baby HD V2.0 1S 1.6" Deadcat Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz
€297.00$342.71
View at seller ↗
