Manufacturer part no. 20430
Listed by racedayquads at €49.49. Delivered to France, including shipping, VAT and any customs duty, it comes to about €77.39. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €49.49 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €12.90 |
| Total delivered | €77.39 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 14 g |
The MATEKSYS M10Q-5883 supports GNSS (GPS, GLONASS, Galileo, and BeiDou) and thus offers excellent RF sensitivity. The SAM-M10Q uses a multi-constellation GNSS module powered by u-blox SAM-M10Q-00B. The SAM-M10Q features the u-blox M10 standard precision GNSS platform and provides exceptional sensitivity and acquisition time for all L1 GNSS signals. This feature will help you pick up the best signals. But also enhance the dynamic position accuracy with small antennas or in non-line-of-sight scenarios. The high number of visible satellites enables the receiver to select the best signals. Hence this maximizes the position availability, in particular under challenging conditions such as in deep urban canyons. The high-gain 15x15mm2 patch antenna provides the best balance between performance and small size. The omnidirectional antenna radiation pattern increases flexibility for device installation. Check out all our GPS modules, and our full line of Matek products! Features M10-5883 uses multi-constellation GNSS powered by u-blox SAM-M10Q-00B Ultra-low-power GNSS antenna module for easiest integration Simple design-in with no RF expertise required Less than 38 mW power consumption without compromising GNSS performance Maximum position availability with 4 concurrent GNSS reception Advanced spoofing and jamming detection Pin-compatible with previous SAM-M8Q Specifications GNSS u-blox SAM-M10Q-00B (GPS, GLONASS, Galileo, and BeiDou) Magnetic Compass QMC5883L Patch antenna 15x15x4mm Input voltage range: 4~9V (5V pad/pin) Power consumption: 13mA UART baudrate: 9600 default Operating Temperatures: -20~80 °C UART(TX, RX) interface for GNSS SAM-M10Q-00B I2C(DA, CL) interface for Compass QMC5883L JST-GH-4P connector (SM04B-GHS-TB). 1.27mm pitch GNSS PPS LED, Green. (Solid ON after powering on, blinking(1Hz) when GNSS get 3D fix) Protocol: UBX(u-blox) 5Hz@GPS+GAL+BDS B1C+GLO or NMEA 1Hz 20mmx20mmx12.4mm 8g Wiring and Settings M10Q-5883 5V to Flight controller 4~9V M10Q-5883 RX to
