racedayquadsHAPPYMODEL
HappyModel BNF Crux35 V2 3.5" Analog Quad - Choose version
Manufacturer part no. 17076
$218.95≈ 189.75 €
Price summary
Listed by racedayquads at €189.75. Delivered to France, including shipping, VAT and any customs duty, it comes to about €245.70. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €189.75 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €40.95 |
| Total delivered | €245.70 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 249 g |
Description
The Crux 35 is an ultra-lightweight 3.5Inch FPV freestyle and racing drone, the weight of the whole drone is only 87g for the analog version and 108g for the digital HD version. The Crux35 series drone use Happymodel's EX1404 high-efficiency motor and HQPROP 3.5-inch three-blade propeller to ensure the largest thrust-to-weight ratio under the most efficient premise, which can bring you a smooth Freestyle flying experience. Happymodel Crux35 Racing Drone V2 comes with the CrazyF411 ELRS flight controller. This board comes with an integrated UART 2.4GHz ExpressLRS receiver and 20A BLheli_S ESC(Bluejay firmware pre-installed) which could support 3-4S. The new V2 version comes with CrazyF411 ELRS AIO flight controller built-in UART ExpressLRS receiver which allows for updating the receiver with ease. Choose from between ELRS 2.4GHz and FrSky for your receiver. Check out our other pre-built quads, as well as the rest of our HappyModel selection! Features Bind tutorial for ELRS Ultra-lightweight 3.5-inch BNF FPV Freestyle Drone HD video transmission and analog video transmission are optional Integrated ExpressLRS UART receiver High efficiency EX1404 power system Can be equipped with Naked Gopro or SMO4K Specifications Weight: 87g Brand: Happymodel Wheelbase: 150mm Dimensions: 130mmx130mmx45mm Receiver option: UART ExpressLRS 2.4GHz HappyModel Flight Controller (ELRS Version) Input Voltage: 2-4S LiPo MCU: STM32F411CEU6 (100MHZ, 512K FLASH) Gyro: BMI270 or ICM42688P (SPI control) ESC Connections: Yes Firmware: CrazybeeF4DX Current Sensor: Yes Mount pattern: 25.5x25.5mm (M2) Dimensions: 32x28x9mm Weight: 5g Built-in 20A Blheli_s ESC each Built-in Betaflight OSD(SPI Control) Built-in UART ExpressLRS 2.4GHz receiver Built-in 5V 1A BEC Onboard ESC: MCU upgraded to EFM8BB21 Power supply: 2-4S LiPo/LiPo HV (7v/17v) Currents: 20A continuous peak 25A (5 seconds) Support BLHeliSuite and ESC-Configurator programmable Factory firmware: Bluejay 0.18.1 Firmware target: F_H_40_48_v0.18.1
Similar products
racedayquadsIn stock
EMAX RTF EZ Pilot Pro Analog Kit w/ Goggles, Radio Transmitter and 75mm Whoop
€287.20$331.40
View at seller ↗
racedayquadsIn stock
Flywoo BNF Firefly 2S Nano Baby 20 HD 2" Quad w/ HDZero - ELRS 2.4GHz
€371.25$428.39
View at seller ↗
racedayquadsIn stock
EMAX BNF Nanohawk 1S Brushless Analog Whoop - Choose Receiver
€160.87$185.63
View at seller ↗
racedayquadsIn stock
Flywoo BNF Firefly DC16 Nano Baby HD V2.0 1S 1.6" Deadcat Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz
€297.00$342.71
View at seller ↗
