racedayquadsHAKRC· Motor control
HAKRC F7220 2-6S AIO 20x20 Flight Controller w/ 32Bit 40A 4in1 ESC
Manufacturer part no. 20387
$137.43≈ 120.52 €
Price summary
Listed by racedayquads at €120.52. Delivered to France, including shipping, VAT and any customs duty, it comes to about €162.62. Prices last checked on 2026-09-28.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €120.52 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €27.10 |
| Total delivered | €162.62 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Electrical
| Current | 40 A |
Mechanical
| Weight | 50 g |
Description
HAKRC bring us another serious contender in whoop sized AIO boards. The HAKRC F7220 2-6S BL-Heli32 bit ESC AIO Flight Controller. This ultra-powerful 20x20mm board is capable of handling the most demanding of tasks, including tons of power delivery such as pad options for 5V/3A & 10V/2.5A BEC delivering unbeatable performance and reliability. Give your quad those high quality parts for a better longevity for your quads. Check out our other AIO boards and our other HAKRC products for sale at RaceDayQuads! NOTE: After upgrading the firmware of HAKRC F7220 AIO, the sensor direction needs to be changed 1. Connect FC to BF and select “configuration” page. 2. In the “flight control and sensor direction” column on the right side of the configuration page, change the first gyroscope to cw 90 3. on the setup page. Calibrate the flight control accelerometer and reset the z-axis and test whether the flight control roll, pitch and yaw are consistent with the BF feedback direction. 4. please check and make safety preparations before takeoff in an open or relatively safe place to test the flight feasibility. 5. If you use the DJI remote control and the DJI FPV glasses, open the serial data receiver Port 2 and MSP Port 6, as shown below: Features The PCB adopts high-end 8-layer 2oz thick copper skin, which has stronger over-current capability and good heat dissipation MOS adopts imported 40V high current resistance MOS, long life and strong load capacity Industrial grade LDO, high temperature resistance High-quality Japanese Murata capacitors, strong filtering performance Size: 40x30mm (20mmx20mm mounting hole) Product net weight: 10g Specifications Flight Controller Input Voltage: 2S-6S MCU: STM32F722RET6 IMU: ICM42688 OSD: AT7456E Black box: 16M UARTs: 5 Barometer: integrated Flight control firmware version: HAKRC F722D BEC: 5V/3A BEC:10V/2.5A Sensor: Built-in current sensor Firmware Target: HAKRCF722D LED: Support WS2812 and other programmable Compatible receivers: CRSF / Frsky
Similar products
racedayquadsIn stock
HappyModel Crazybee F4 Lite 1S Whoop Flight Controller for Mobula6 - Choose Your RX
€81.57$92.81
View at seller ↗
racedayquadsIn stock
HappyModel 1S F4 AIO Toothpick/Whoop Flight Controller w/ 5A 8bit 4in1 ESC & 200mW VTX - ELRS 2.4GHz SPI
€87.84$99.95
View at seller ↗
racedayquadsIn stock
iFlight Blitz F411 1S 5A Toothpick/Whoop Flight Controller w/ 25-50mW VTX & ELRS RX
€87.84$99.95
View at seller ↗
racedayquadsIn stock
T-Motor F411 1S Toothpick/Whoop AIO w/ 13A 4in1 ESC
€121.83$138.62
View at seller ↗
