racedayquadsHAPPYMODEL
HappyModel BNF Mobula6 1S Analog Whoop (SPI FrSky) - Choose Kv
Manufacturer part no. 11923
$164.21≈ 142.31 €
Price summary
Listed by racedayquads at €142.31. Delivered to France, including shipping, VAT and any customs duty, it comes to about €188.77. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €142.31 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €31.46 |
| Total delivered | €188.77 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 104 g |
Description
All products containing batteries must be shipped by a ground shipping method. The Mobula6 Micro FPV Whoop features the Runcam Nano3, Onboard Frsky Receiver, 5A BLheli_S 4-in-1 ESC, and more! This mini and lightweight whoop (65mm) will take you hard-to-get places! Pick a motor: Race (25000Kv) or Standard (19000Kv). Check out our other pre-built quads, as well as the rest of our HappyModel selection! Features AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX Extreme light 1S 65mm Brushless whoop only 20g Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera Smooth and powerful Compatible with 1S Lipo/LIHV Camera Angle adjustable Specifications Brand Name: Happymodel Item Name: Mobula6 1S 65mm Brushless whoop drone BNF version Wheelbase: 65mm Size: 80mmx80mmx37mm Weight: 20g Receiver option: Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode) Motor speed option: SE0802 KV25000(Race Edition) SE0802 KV19000(Regular Edition) Motors Model: SE0802 19000KV or KV25000 Configuration:9N12P Stator Diameter:8mm Stator Length:2mm Shaft Diameter: Φ1mm Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm Weight(g):1.9g No.of Cells(Lipo):1S only Propellers Gemfan 1219-3 Center Thickness:5mm Prop Disk Diameter:31mm Center Hole Inner diameter:1.0mm Weight:0.28g Flight controller (Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: ICM42688P Board size: 28.5x28.5MM Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver Built-in 5V 1A BEC Built-in voltage detection Onboard 4in1 ESC MCU upgraded to ICM42688P Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT600 Onboard Frsky SPI D8 receiver Version SPI BUS receiver Frsky D8 compatible Compatible Non
Similar products
racedayquadsIn stock
EMAX RTF EZ Pilot Pro Analog Kit w/ Goggles, Radio Transmitter and 75mm Whoop
€287.20$331.40
View at seller ↗
racedayquadsIn stock
Flywoo BNF Firefly 2S Nano Baby 20 HD 2" Quad w/ HDZero - ELRS 2.4GHz
€371.25$428.39
View at seller ↗
racedayquadsIn stock
EMAX BNF Nanohawk 1S Brushless Analog Whoop - Choose Receiver
€160.87$185.63
View at seller ↗
racedayquadsIn stock
Flywoo BNF Firefly DC16 Nano Baby HD V2.0 1S 1.6" Deadcat Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz
€297.00$342.71
View at seller ↗
