racedayquadsGEPRC· Robots & kits
GEPRC CL25 Cinelog25 Cinewhoop 2.5" Micro Frame Kit
Manufacturer part no. 15872
$45.80≈ 39.69 €
Manufacturer part no. 15872
Listed by racedayquads at €39.69. Delivered to France, including shipping, VAT and any customs duty, it comes to about €65.63. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €39.69 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €10.94 |
| Total delivered | €65.63 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 191 g |
Does not come with naked Gopro mount. Please refer to the includes list at the bottom of the listing for all included items. The classic CL25 Frame, designed by the GEPRC team, has been upgraded. They've redesigned the shock absorption structure of the camera mount, eliminated the jelly coming from the FPV camera, and you can now use 3, 4, and 5 damping rings according to the flight state to obtain the best stability in vibration and noise. The CL25 can be used for Vista HD digital image transmission system or Analog image transmission system. The center of gravity of the quadcopter is in the middle, Check out all our DJI-compatible frames, electronics, and accessories as well as our whole GEPRC product line! Specifications Dimensions: 109mm Frame Style: Cinewhoop Top Plate: 2.5mm Bottom Plate: 1.5mm Bottom Plate(camera): 2mm Stack Size: 26.5x26.5mm Motor Mount: 9x9mm (compatible with 1105/1204/1206 motors) Camera Mount: 14-20mm (Nano and Micro-sized) Weight: 47.8g Recommended: Motor: BetaFPV 1404 4500Kv Micro Motor 4 Pack FC/ESC: GEPRC F411 2-6S AIO Flight Controller w/ 35A 4in1 ESC Prop: Gemfan D63 Ducted Durable Tri-Blade 2.5" Cinewhoop Prop 8 Pack LiPo: RDQ Series 14.8V 4S 650mAh 80C LiPo Micro Battery Includes 1x Top plate 2.5mm 1x Bottom plate 1.5mm 1x Bottom Plate (Camera)1.5mm 4x (M2x3.5x25mm) Aluminum posts 2x (M2x3.5x8mm) Aluminum posts 28x (M2x6mm) YFS Round head screws 2x (M2x8mm) YFS Round head screws 4x (M2x12mm) YFS countersunk head screws 16x (M2x2mm) Nylon Nuts 4x (M2x18mm) YFS countersunk head screws 5x Damping Rings 1x (19x19mm) Mount of camera 1x (14x14mm) Mount of camera 1x 3D print part of XM antenna 1x 3D print part of TBS antenna 1x Naked Camera Mount (This is just the base, NOT the actual camera case) 2x Batteries pads 2x EVA Landing pads 4x 2.5-inch Guards 1x EVA Damping Ring of Guard 2x Antenna Tubes 2x Batteries straps (M15x150mm）
