racedayquadsGEPRC· Robots & kits
GEPRC Smart16 Nano 1.6" Micro Frame Kit
Manufacturer part no. 17632
$21.41≈ 18.55 €
Price summary
Listed by racedayquads at €18.55. Delivered to France, including shipping, VAT and any customs duty, it comes to about €40.26. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €18.55 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €6.71 |
| Total delivered | €40.26 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 64 g |
Description
Introducing... the GEPRC SMART 16 Freestyle Frame Kit! The GEPRC Smart 16 1.6" Nano Freestyle Frame is a tiny, lightweight freestyle FPV addition to the GEPRC Phantom series. The SMART 16 continues the consistent lightweight design concept of the Phantom series. The 1.5mm carbon fiber arm, with a 1mm top plate, creates a balance point that is maintained between the strength of the fuselage and the weight of the whole drone which allows it to be lightweight and tough at the same time. The M1.4 Motors mounting holes can be used to install small 3-hole brushless motors to reduce the weight of the body. Good arm width contributes to high durability. This design is great for freestyle flying, with no props in view! Thanks to the 3D printed parts, the frame weighs only 8.5g, saving a lot of overall weight. The independent battery compartment is designed to stick the battery on top and below the drone making it very convenient and fast to replace batteries. Check out our other Micro frames And our whole GEPRC product line! Specifications Frame Style: Toothpick Top plate thickness: 1.0mm Bottom plate thickness: 1.5mm Camera plate thickness: 1.0mm Stack Size 16x16mm Motor Mount: 6mm Tri 08xx Camera Mount: 14mm Nano Weight: 8.5g (including 3D prints) Recommended: Motor: GEPRC SPEEDX2 0803 11000Kv Micro Motor AIO: GEPRC F4 V1.4 2-4S AIO Flight Controller Prop: HappyModel Gemfan 1610 Bi-Blade 40mm Micro/Whoop Prop 4 Pack LiPo: RDQ Series 350mah 2S 50C/100C 7.6V HV XT30 Micro Battery Includes 1x GEPRC SMART 16 1.5mm Bottom Plate 2x GEPRC SMART 16 1mm Camera Plate 1x GEPRC SMART 16 1mm Top Plate 2x 120mm LiPo Strap 1x 3D Printed Part Set 1x Screwdriver Set 1x Hardware Set 2x Battery Pad
