racedayquadsRUNCAM
SpeedyBee V3 F722 3-6S 30x30 Flight Controller
Manufacturer part no. 19197
$92.81≈ 80.43 €
Price summary
Listed by racedayquads at €80.43. Delivered to France, including shipping, VAT and any customs duty, it comes to about €114.52. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €80.43 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €19.09 |
| Total delivered | €114.52 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 64 g |
Description
The improvements to the SpeedyBee V3 F722 3-6S 30x30 Flight Controller are staggering! This flight controller comes with onboard Wi-Fi which boasts 33% faster wireless firmware flashing and full Betaflight Configuration. With an optimized algorithm and upgraded Bluetooth/Wi-Fi chip, you can dive into your Blackbox data every time you land your quad. Just take your smartphone out, connect, and download your flight in 20 seconds. The path to progress has never been easier. As if that weren't enough, this FC can support up to 8 motors and has solder-free plugs for your VTX, RX, camera, GPS, and 4x LED strips. If you hate soldering, this is the Flight Controller for you! Browse all our 30x30 flight controllers and all our Speedy Bee products! Features DJI Plug and Play Built in Wi-Fi and Bluetooth Camera control pad Blackbox 6 Uarts, buzzer pad, and I2C Specifications MCU: STM32F722 IMU: BMI270 USB: Type-C Baro: BMP280 (I2C) OSD: BetaFlight OSD w/ AT7456E chip BLE Support, used for Flight Controller configuration WiFi Support, used for data transfer, e.g firmware flashing, and Blackbox analysis. DJI Air Unit plug: A full DJI Air Unit JST slot onboard BlackBox: 500MB onboard data flash BetaFlight Camera Control Pad: Yes Power input: 3S - 6S Lipo 10 groups of 5V output, three +5V pads and 1 BZ+ pad (used for Buzzer) on front side, and 6 +5V output included in the connectors on bottom side. The total current load is 2A. 2 groups of 9V output, one +9V pad on front side and other included in a connector on bottom side. The total current load is 4A. Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load. Supported. Designed for 3.3V-input receivers. Up to 500mA current load. ESC signal M1 - M4 on bottom side and M5-M8 on front side. UART: 5 sets (UART1, UART2, UART3, UART4, UART6) ESC Telemetry: UART UART4 RX I2C: Supported. SDA & SCL pads on front side. Used for magnetometer, sonar, etc. LED: Used for WS2812 LE
Similar products
racedayquadsIn stock
SkyStarsRC F7 Mini HD Pro 3-6S 20x20 Flight Controller
€59.81$69.01
View at seller ↗
racedayquadsIn stock
SkyStarsRC H7 Single Gyro 2-6S 30x30 Flight Controller
€76.82$88.64
View at seller ↗
