
Manufacturer part no. 19033
Listed by racedayquads at €148.50. Delivered to France, including shipping, VAT and any customs duty, it comes to about €196.20. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €148.50 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €32.70 |
| Total delivered | €196.20 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 14 g |
Packed with features, the H743 Mini from Matek is ready to go. Compatible with INAV, Betaflight, and ArduPilot. Check out our 20x20 FCs as well as the entire Matek selection! Specifications Input Voltage: 2-8S MCU: STM32H743VIT6, 480MHz IMU: ICM42688-P (SPI1) & ICM42605 (SPI4) Baro: Infineon DPS310 (I2C2) OSD: AT7456E (SPI2) Blackbox: MicroSD card socket (SDIO) UARTs: 5.5 (1,2,4,6,7, Rx8) PWM Outputs: 11 I2C: 2 (I2C1/DA1 CL1 pads, no I2C2 breakout) CAN: Yes (C-H, C-L pads) BEC: 5V 1.5A cont. (Max.2A) BEC: 8V 1.5A cont. (Max.2A), 8V outputs stable when Vbat>=10V, 8V outputs 80% of Vbat when Vbat< 10V LDO 3.3V: 200mA VB2 pad supports Max. 69V (voltage divider 1K:20K) Static Power: 200mA@5V with Betaflight, 150mA@5V with ArduPilot ADC: 5 (VBAT, Current, RSSI, VB2, CU2) Dual Camera Inputs Switch: Yes 8V Power ON/OFF Switch: Yes Firmware: MATEKH743 Mounting Pattern: 20x20 M3 Dimensions: 36x28x6.5mm Weight: 7g Includes 1x Matek H743 Mini V3 20x20 Flight Controller 6x Silicon grommets M4 to M3 6x Brass grommets M3 to M2 1x JST-SH1.0_8pin cable, 5cm 2x JST-SH1.0_8pin connectors Wiring Diagram

