racedayquadsMATEK· Boards & embedded computing
Matek F405-WTE Wing Flight Controller w/ Integrated ESP32 & RX
Manufacturer part no. MATE-F405-WTE
$85.67≈ 74.24 €
Manufacturer part no. MATE-F405-WTE
Listed by racedayquads at €74.24. Delivered to France, including shipping, VAT and any customs duty, it comes to about €107.09. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €74.24 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €17.85 |
| Total delivered | €107.09 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 36 g |
Matek has done it again with another top of the line Matek F405-WTE Wing Flight Controller w/ Integrated ESP32 & RX . This time with an integrated ESP32 module that can be used as an ELRS Receiver of wifi telemetry! You won't find any better quality in the wing game. Check out our other wing flight controllers, as well as the rest of our Matek selection! Specifications Input Voltage 2-6S MCU: STM32F405RGT6, 168MHz , 1MB Flash IMU: ICM42688-P Baro: SPL06-001 OSD: AT7456E Blackbox: MicroSD card slot ESP WiFi Telemetry: Yes(MAVLink, 14dBm) ExpressLRS 2.4G Receiver: Yes(CRSF protocol, Telemetry 12dBm) UARTs: 6 + 1x Softserial_Tx option(INAV) PWM outputs: 12 I2C: Yes ADC: 4 (VBAT, Current, RSSI, Airspeed) Dual Camera Inputs Switch: Yes FC Firmware: ArduPilot: MatekF405-TE, INAV: MATEKF405TE_SD (not available in INAV configurator 4.x) Mounting Pattern: 25x25mm M2 Dimensions: 44x29x12.7mm Weight: 22g BEC Specifications BEC 5V output Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed Continuous current: 2 Amps, Max.3A BEC 9V /12V output Designed for Video Transmitter, Camera, Gimbal ect. Continuous current: 2 Amps, Max.3A 12V option with Jumper pad for stable 9V/12V output, input voltage should > output voltage +1V BEC Vx output Designed for Servos Voltage adjustable, 5V Default, 6V or 7.2V via jumper Continuous current: 8 Amps, Max.10A for stable Vx output, input voltage should > Vx voltage +1V BEC 3.3V output Designed for Baro / Compass module and external 3.3V peripherals Linear Regulator Continuous current: 200mA Includes 1x Matek F405-WTE Wing Flight Controller w/ Integrated ESP32 & RX 1x USB(Type-C)/Beep (Passive buzzer) Extender + 20cm JST-SH-6P to JST-SH-6P cable for USB extender. 2x IPEX-MHF1 2.4G Antennas 1x Rubycon ZLH 35V 470uF capacitor 1x Set Dupont 2.54 pins Wiring Diagram
