Manufacturer part no. TINY-REALPIT
Listed by racedayquads at €6.18. Delivered to France, including shipping, VAT and any customs duty, it comes to about €25.42. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €6.18 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €4.24 |
| Total delivered | €25.42 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
RealPit VTX Power Switch
New · sold by tyler4man22 · ships from US
Imported from outside the EU — duties and VAT included in the delivered cost; customs formalities and delays are not
€5.19
billed $5.99
€21.41 delivered
Third-party listings on eBay, matched to this product by its part number or title. Robotitem neither sells nor warrants these items: condition, stock and lead times are the seller's, and a listing disappears once sold. Delivered cost includes the seller's actual shipping.
Plug in your VTx at any time with 0 power start-up! Check out all our LEDs, and all our TinysLEDs products! Features Plug in your VTx at any time with 0 power start-up (Not Available with FlightOne at current time) Turn off your VTx on the line to avoid heat buildup Fast Team Race Pit stops (Sub second transitions possible) Compatible with all major VTxs Turn off VTx during races to test hover builds without interfering with other pilots in the air. Turn off VTx after Crash for clean video for other racers. Solo Endurance Races, 3 quads ready on the line. Practice for more than 1 pack without taking off goggles. (Instructions on how to setup on OpenTX / Spektrum Coming soon) LED Indicator light on board. (Light On \ Power On) Can be used on any pad on Flight Controller. Does not need a full UART. I.E.: SmartAudio/Tramp on TX and RX for RealPit PinIO Up to 4 RealPits per quad. This opens the possibility for LEDs, and VTX, and any other device you can imagine. Toggle LED Power or any other devices under 1 amp draw. Specifications Currently Supported Software: Betaflight (PinIO 3.3.x or Greater) Butterflight (PinIO) FlightOne 1.2.4 + (PINTOGGLE) Operating Voltage: 5V - 28V (HV-6s) 1Amp Switch Dimensions: 10 x 12.5 x 2.5 mm Weight: 0.5 Grams w/ Heatshrink Includes 1x TinysLEDs RealPit VTX Power Switch 1x 1/2" Heat shrink piece Demo Video ( Team EMAX Team Race): Setup Betaflight Settings: In CLI: Type RESOURCE Locate UART TX/RX pad resource ID you are using. We wired to RX4 in this demo. RX4 is A01 Note the name of resource and ID. Next we will clear that pad from its assigned resource. Type RESOURCE SERIAL_RX 4 NONE Next we will set the Custom Mode Switches. We will set up 1 switch Copy and past these Commands into CLI: set pinio_box = 40,41,42,43 aux 2 40 2 1600 2100 0 Next we need to assign the Resource ID to the Custom Mode switch. Using the Resource ID from above. "A01" resource PINIO 1 A01 If you wish to set up more pads for additional RealPits. replace the area in
