racedayquadsNewBeeDrone· Motor control
NewBeeDrone Hummingbird 200 RaceSpec 80A 3-6S AM32 ESC - 20x20
Manufacturer part no. G25138CN1Z
$79.72≈ 69.09 €
Manufacturer part no. G25138CN1Z
Listed by racedayquads at €69.09. Delivered to France, including shipping, VAT and any customs duty, it comes to about €100.91. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €69.09 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €16.82 |
| Total delivered | €100.91 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Current | 80 A |
| Weight | 54 g |
The NewBeeDrone Hummingbird 200 RaceSpec 4-in-1 ESC is a compact, race-tuned 20x20 ESC engineered for the brutal demands of 5” FPV racing. Developed in collaboration with pro pilot Kyle Buell (Twidgit), it directly addresses real pain points racers face—overheating MOSFETs, pad failures after crashes, and oversized ESCs that don’t fit low-profile frames. Powered by an AT32F421 MCU with integrated gate driver, the ESC runs smooth, responsive AM32 firmware, giving racers reliable performance and open-source configurability in a compact footprint. Check out all of our 20x20 ESCs and the rest of our NewBeeDrone products. Features Sustains 80A continuous current for up to 10 seconds and 100A bursts 3D motor pad structure wraps around the board and provides a strong solder bond Onboard dual 400W TV S diodes provide effective built-in surge protection AM32 firmware offers reliable open-source configurability Specifications Input Voltage: 3–6S LiPo Continuous Current for 10 seconds: 80A per channel Burst Current: 100A (up to 3 seconds) Firmware: AM32 MCU: AT32F421 with built-in gate driver TVS Protection: 2x onboard TVS diodes (400W each) Motor Pads: 3D structure – top / bottom / side solderable PCB: 6-layer, 3oz copper, blind vias, gold-plated finish Signal Connector: 8-pin JST-SH 1.0 Power Pads: Reinforced BAT+ / BAT– for high-current builds Mounting Pattern: 20x20mm (M3 holes) Dimensions: 35 x 45 mm (including solder pads) Weight: ~13.9g (without wires or capacitors) Links User Guide 3D Design Files (STEP) Includes 1x Hummingbird 200 ESC RaceSpec 80A 3-6S AM32 20x20 5x Grommet 1x 14AWG power cable 1x XT60 plug 1x 8Pin 100mm silicone cable for FC connection 1x 1000uf capacitor 2x Heat shrink for capacitor
