m5stackM5Stack
Cap CC1101 & NFC for Cardputer Adv
Manufacturer part no. U219
$18.95≈ 16.42 €
Price summary
Listed by m5stack at €16.42. Delivered to France, including shipping, VAT and any customs duty, it comes to about €37.70. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €16.42 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €6.28 |
| Total delivered | €37.70 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Price history
4 price/stock records since 8/28/2026
Specifications (automatically extracted)
Mechanical
| Weight | 45 g |
Description
Description Cap CC1101 is a wireless expansion module integrating Sub-1 GHz RF and NFC functions, compatible with Cardputer-Adv and CardputerZero. The RF section is based on the TI CC1101 transceiver. Built-in dual single-pole triple-throw (SP3T) RF switches and multi-band RF matching circuits multiplex the 315MHz, 433MHz, 868MHz/915MHz bands to one RP-SMA antenna interface, supporting 2-FSK, 4-FSK, GFSK, MSK, ASK, OOK, and other modulation schemes. The NFC section uses the ST25R3916 chip and supports ISO14443A/B, FeliCa™, and ISO15693 protocols. It can operate in reader/writer and card emulation modes. The module communicates via SPI, includes an onboard DC-DC buck circuit, and provides a standard HY2.0-4P Grove interface for easy sensor expansion. It is suitable for wireless remote control, access-control identification, device communication, and IoT prototyping. Features SPI serial communication protocol CC1101 low-power Sub-1 GHz RF transceiver Operating frequency: 315/433/868/915 MHz Supports 2-FSK, 4-FSK, GFSK, MSK, ASK, and OOK modulation schemes Independent 64-byte RF RX FIFO and TX FIFO Built-in dual SP3T RF switches and multi-band RF matching network for dynamic band switching External RP-SMA antenna interface ST25R3916 high-performance NFC front end Supports reader/writer mode and card emulation mode Compatible with NFC-A, NFC-B, NFC-F, and NFC-V standards 512-byte NFC FIFO HY2.0-4P Grove expansion interface Supports sensor module expansion Development Platform: Arduino UiFlow2 Includes 1 x Cap CC1101 1 x 315 MHz RP-SMA rubber antenna 1 x 433 MHz RP-SMA rubber antenna 1 x 868 MHz RP-SMA rubber antenna (for 868MHz and 915MHz bands) Applications Wireless remote control Access-control identification Device communication IoT prototyping Specifications Specification Parameter RF chip CC1101 Operating frequency band 315 / 433 / 868 / 915 MHz Communication range (FSK modulation, 58kbps air rate) 315MHz: 435m 433 / 868 / 915MHz: 441m TX power +10 dBm Rubber anten