MÄDLERMÄDLER· Timing Belts and Pulleys
Flange for timing belt pulley thickness 1.5mm Ø 42 x 38 x 30.5mm steel zinc plated
Manufacturer part no. 16010302
$4.08≈ 3.54 €
In stock — 5 unitslead time 14 d
Estimated landed cost
| Item | €3.54 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €3.71 |
| Total delivered | €22.25 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 8 g |
Other characteristics
| Inner diameter | 30.5 mm |
| Kink point diameter | 38 mm |
| Outer diameter | 42 mm |
| Thickness | 1.5 mm |
| Material | Steel |
| Surface | Zinc-plated |
Description
Material: Steel, zinc-plated. Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time.
Similar products
MÄDLERIn stock
Neoprene timing belt 1400 H 280 teeth belt width 200=50.8mm
€210.46$242.34
View at seller ↗MÄDLERIn stock
Neoprene timing belt 1250 H 250 teeth belt width 200=50.8mm
€175.38$201.95
View at seller ↗MÄDLERIn stock
Neoprene timing belt 1000 H 200 teeth belt width 200=50.8mm
€144.47$166.36
View at seller ↗