MÄDLERMÄDLER· Timing Belts and Pulleys
Flange for timing belt pulley thickness 0.5mm Ø 10 x 7 x 4,8mm stainless steel
Manufacturer part no. 16019115
$6.96≈ 6.04 €
On backorderlead time 14 d
Estimated landed cost
| Item | €6.04 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €4.21 |
| Total delivered | €25.25 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 1 g |
Other characteristics
| Inner diameter | 4.8 mm |
| Kink point diameter | 7 mm |
| Outer diameter | 10 mm |
| Thickness | 0.5 mm |
| Material | Stainless steel (304) |
| Surface | Blank |
Description
Material: Stainless steel 1.4301. Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time.
Similar products
MÄDLERIn stock
Neoprene timing belt 1400 H 280 teeth belt width 200=50.8mm
€210.46$242.34
View at seller ↗MÄDLERIn stock
Neoprene timing belt 1250 H 250 teeth belt width 200=50.8mm
€175.38$201.95
View at seller ↗MÄDLERIn stock
Neoprene timing belt 1000 H 200 teeth belt width 200=50.8mm
€144.47$166.36
View at seller ↗