MÄDLER
Manufacturer part no. 25501845
Listed by MÄDLER at €605.07. Delivered to France, including shipping, VAT and any customs duty, it comes to about €744.08. Prices last checked on 2026-08-07.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €605.07 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €124.01 |
| Total delivered | €744.08 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 2.7 kg |
| Bore diameter | 45 mm |
| Fig | 2 |
| Hub diameter | 68 mm |
| Max torque | 1 575 Nm |
| No of teeth | 18 |
| Outer diameter | 105.5 mm |
| Pitch circle diameter | 95.49 mm |
| Tooth quality | 7 |
| Tooth width | 50 mm |
| Hardened | Yes |
| Material | Steel (A29) |
| Module | 5 (helical, LH) |
| Surface | Ground finish |
Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31′ 42”. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand).
Semantically close products available for less — check the specs match your need.