PololuPCX· Motors & actuators
120:1 Mini Plastic Gearmotor HP, Offset 3mm D-Shaft Output, Extended Motor Shaft
$9.95≈ 8.74 €
Listed by Pololu at €8.74. Delivered to France, including shipping, VAT and any customs duty, it comes to about €40.49. Prices last checked on 2026-09-29.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €8.74 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €6.75 |
| Total delivered | €40.49 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $9.95 | |
| ≥ 5 | $9.15 | −8 % |
| ≥ 25 | $8.42 | −15 % |
| ≥ 100 | $7.75 | −22 % |
| Voltage | 4.5 V |
| Weight | 19 g |
| No load current 4 5v | 130 mA |
| No load speed 4 5v | 150 rpm |
| Shaft diameter | 3 mm |
| Stall current 4 5v | 1 250 mA |
| Stall torque 4 5v | 25 oz·in |
| Encoder | encoder-compatible (extended motor shaft) |
| Gear ratio | 120:1 |
| Shaft type | offset 3mm D |
| Size | 36.5 x 20 x 27.4 mm |
This compact, inexpensive plastic gearmotor (high-power brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range. The gearbox has a 9.7mm-long, 3 mm-diameter D-shaped output shaft that is offset from but parallel to the motor shaft, and a built-in safety clutch helps protect the gears from excessive loads. This version also has a 5×1.5 mm extended motor shaft. Key specifications:
