PololuConcentric· Motors & actuators
Listed by Pololu at €175.06. Delivered to France, including shipping, VAT and any customs duty, it comes to about €240.07. Prices last checked on 2026-09-29.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €175.06 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €40.01 |
| Total delivered | €240.07 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $199.18 | |
| ≥ 5 | $189.22 | −5 % |
2 price/stock records since 8/4/2026
| Current max. | 3.2 A |
| Voltage | 12 V |
| Weight | 1.39 kg |
| Ip rating | IP65 |
| Actual stroke length | 9.84 in |
| Current 12v no load | 1.2 A |
| Extended length | 25.55 in |
| Linear speed 12v max load | 0.48 in/s |
| Linear speed 12v no load | 0.57 in/s |
| Max linear force 12v | 110 lb |
| Maximum duty cycle | 25 % |
| Nominal stroke length | 10 in |
| Retracted length | 15.71 in |
This 12 V light-duty (LD) linear actuator with a 20:1 gear reduction can lift loads up to 50 kgf [110 lbs or 500 N] and can withstand static loads up to 250 kgf [550 lbs or 2500 N]. It has a maximum speed of 14.6 mm/s [0.57″/s] at no load and 12.3 mm/s [0.48″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion. The shaft holds its position when unpowered. This version has a 10-inch stroke (9.8″ usable) and a feedback potentiometer that lets you determine where the actuator is in its stroke.
Semantically close products available for less — check the specs match your need.
| Stall current 12v | 7 A |
| Feedback potentiometer included | Yes |
| Gear ratio | 20:1 |
| Limit switches included | Yes |
| Maximum operating temperature | 65 °C |
| Minimum operating temperature | -25.0 °C |
