PololuPololu· Motor control
Pololu Dual G2 High-Power Motor Driver 24v18 Shield for Arduino
Manufacturer part no. 2518
$104.95≈ 92.24 €
Price summary
Listed by Pololu at €92.24. Delivered to France, including shipping, VAT and any customs duty, it comes to about €140.69. Prices last checked on 2026-09-29.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock — 21 units
- origin USA
- RoHS3
Estimated landed cost
| Item | €92.24 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €23.45 |
| Total delivered | €140.69 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Volume pricing
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $104.95 | |
| ≥ 5 | $96.55 | −8 % |
| ≥ 25 | $88.83 | −15 % |
| ≥ 100 | $81.72 | −22 % |
Datasheets & documents
- 📄 Pololu Dual G2 High-Power Motor Driver Shields for Arduino User’s Guide
- 📄 Dimension diagram of the Pololu Dual G2 High-Power Motor Driver 18v18 or 24v14 Shield for Arduino
- 📄 Dimension diagram of the Pololu Dual G2 High-Power Motor Driver 18v22 or 24v18 Shield for Arduino
- 📄 3D model of the Dual G2 High-Power Motor Driver 18v18 or 24v14 Shield for Arduino
- 📄 3D model of the Dual G2 High-Power Motor Driver 18v22 or 24v18 Shield for Arduino
- 📄 Drill guide for the Dual G2 High-Power Motor Driver 18v22 or 24v18 Shield for Arduino
- 📄 Drill guide for the Dual G2 High-Power Motor Driver 18v18 or 24v14 Shield for Arduino
- 📄 Arduino library for the Pololu Dual G2 High Power Motor Driver Shields
- 📄 New product: Dual G2 High-Power Motor Drivers
Specifications (automatically extracted)
Electrical
| Frequency max. | 100 000 Hz |
| Voltage max. | 40 V |
| Voltage min. | 6.5 V |
Mechanical
| Weight | 19 g |
Other characteristics
| Continuous output current per channel | 18 A |
| Current sense | 0.02 V/A |
| Maximum logic voltage | 5.5 V |
| Minimum logic voltage | 1.8 V |
| Motor channels | 2 |
| Other pcb markings | 0J10697, blank white box |
| Pcb dev codes | ash06c |
| Reverse voltage protection | Yes |
| Size | 2.56″ × 2.02″ × 0.38″ |
Description
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 40 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic current sensing and current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.
Cheaper alternatives
Semantically close products available for less — check the specs match your need.
Similar products
PololuIn stock
Pololu Dual G2 High-Power Motor Driver 18v18 Shield for Arduino
€65.87$74.95
View at seller ↗
PololuIn stock
Pololu Dual G2 High-Power Motor Driver 24v14 Shield for Arduino
€70.27$79.95
View at seller ↗
PololuIn stock
Pololu Dual G2 High-Power Motor Driver 18v22 Shield for Arduino
€92.24$104.95
View at seller ↗
