PololuPololu· Motor control
TB67S279FTG Stepper Motor Driver Compact Carrier
Manufacturer part no. 3098
$11.75≈ 10.33 €
Price summary
Listed by Pololu at €10.33. Delivered to France, including shipping, VAT and any customs duty, it comes to about €42.40. Prices last checked on 2026-09-29.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock — 153 units
- origin USA
- RoHS3
Estimated landed cost
| Item | €10.33 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €7.07 |
| Total delivered | €42.40 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Volume pricing
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $11.75 | |
| ≥ 5 | $10.81 | −8 % |
| ≥ 25 | $9.95 | −15 % |
| ≥ 100 | $9.15 | −22 % |
Datasheets & documents
- 📄 TB67S249FTG datasheet
- 📄 TB67S279FTG datasheet
- 📄 TB67S279FTG and TB67S249FTG application note
- 📄 Schematic diagram of the TB67S279FTG/TB67S249FTG Stepper Motor Driver Compact Carrier
- 📄 Dimension diagram of the TB67S2x9FTG Stepper Motor Driver Compact Carrier
- 📄 3D model of the TB67S2x9FTG Stepper Motor Driver Compact Carrier
- 📄 Drill guide for the TB67S2x9FTG Stepper Motor Driver Compact Carrier
- 📄 Video: setting the current limit on Pololu stepper motor driver carriers
- 📄 TB67S249FTG documentation
- 📄 TB67S279FTG documentation
Specifications (automatically extracted)
Electrical
| Voltage max. | 47 V |
| Voltage min. | 10 V |
Mechanical
| Weight | 1.5 g |
Other characteristics
| Continuous current per phase | 1.1 A |
| Maximum current per phase | 2 A |
| Maximum logic voltage | 5.5 V |
| Minimum logic voltage | 2 V |
| Current limit control | potentiometer |
| Header pins soldered | No |
| Microstep resolutions | full, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32 |
| Motor driver | TB67S279FTG |
| Other pcb markings | 0J11687 |
| Pcb dev codes | md34a |
Description
This breakout board for Toshiba’s TB67S279FTG microstepping bipolar stepper motor driver is arranged in the popular 16-pin Pololu form factor, making it a more compact alternative to our full breakout. It features adjustable current limiting and seven microstep resolutions (down to 1/32-step). Additionally, it dynamically selects an optimal decay mode by monitoring the actual motor current, and it can automatically reduce the driving current below the full amount when the motor is lightly loaded to minimize power and heat. The TB67S279FTG has a wide operating voltage range of 10 V to 47 V, and our carrier board can deliver approximately 1.1 A per phase continuously without a heat sink or forced air flow (up to 2 A peak). It features built-in protection against under-voltage, over-current, and over-temperature conditions.
Cheaper alternatives
Semantically close products available for less — check the specs match your need.
