PololuConcentric· Motors & actuators
Listed by Pololu at €465.25. Delivered to France, including shipping, VAT and any customs duty, it comes to about €588.30. Prices last checked on 2026-09-29.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €465.25 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €98.05 |
| Total delivered | €588.30 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $529.36 | |
| ≥ 5 | $502.89 | −5 % |
| Current max. | 13.2 A |
| Voltage | 12 V |
| Weight | 7 kg |
| Ip rating | IP65 |
| Actual stroke length | 23.58 in |
| Current 12v no load | 2.4 A |
| Extended length | 58.62 in |
| Linear speed 12v max load | 0.56 in/s |
| Linear speed 12v no load | 0.66 in/s |
| Max linear force 12v | 550 lb |
| Maximum duty cycle | 25 % |
| Nominal stroke length | 24 in |
| Retracted length | 35.04 in |
This 12 V industrial-duty (ID) linear actuator uses an acme screw drive to lift loads up to 250 kgf [550 lbs or 2500 N] and withstand static loads up to 450 kgf [1000 lbs or 4500 N]. It has a maximum speed of 16.8 mm/s [0.66″/s] at no load and 14.3 mm/s [0.56″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion, and an overload clutch protects the actuator from being damaged by excessive loads. The shaft holds its position when unpowered. This version has a 24-inch stroke (23.5″ usable) and no feedback potentiometer.
Semantically close products available for less — check the specs match your need.
| Stall current 12v | 50 A |
| Feedback potentiometer included | No |
| Gear ratio | 20:1 |
| Limit switches included | Yes |
| Maximum operating temperature | 65 °C |
| Minimum operating temperature | -25.0 °C |
| Overload clutch included | Yes |
| Screw type | acme |
