PololuConcentric· Motors & actuators
Glideforce MD122004 Medium-Duty Linear Actuator: 100kgf, 4" Stroke (3.9" Usable), 0.58"/s, 12V
$258.83≈ 227.48 €
Listed by Pololu at €227.48. Delivered to France, including shipping, VAT and any customs duty, it comes to about €302.98. Prices last checked on 2026-09-29.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €227.48 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €50.50 |
| Total delivered | €302.98 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $258.83 | |
| ≥ 5 | $245.89 | −5 % |
| Current max. | 4.6 A |
| Voltage | 12 V |
| Weight | 980 g |
| Ip rating | IP65 |
| Actual stroke length | 3.94 in |
| Current 12v no load | 1.1 A |
| Extended length | 12.01 in |
| Linear speed 12v max load | 0.41 in/s |
| Linear speed 12v no load | 0.58 in/s |
| Max linear force 12v | 225 lb |
| Maximum duty cycle | 25 % |
| Nominal stroke length | 4 in |
| Retracted length | 8.07 in |
This 12 V medium-duty (MD) linear actuator can lift loads up to 100 kgf [225 lbs or 1000 N] and can withstand static loads up to 450 kgf [1000 lbs or 4500 N]. It has a maximum speed of 14.7 mm/s [0.58″/s] at no load and 10.4 mm/s [0.41″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion. The shaft holds its position when unpowered. This version has a 4-inch stroke (3.9″ usable) and a no feedback potentiometer.
Semantically close products available for less — check the specs match your need.
| Stall current 12v | 14 A |
| Feedback potentiometer included | No |
| Gear ratio | 20:1 |
| Limit switches included | Yes |
| Maximum operating temperature | 65 °C |
| Minimum operating temperature | -25.0 °C |
