PololuConcentric· Mechanical Components
Glideforce LACT6-1000BL Industrial-Duty Linear Actuator with Ball Screw Drive: 450kgf, 6" Stroke (4.8" Usable), 0.66"/s, 12V
$588.73≈ 511.27 €
In stock — 3 units
- origin Taiwan
- RoHS3
Estimated landed cost
| Item | €511.27 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €107.25 |
| Total delivered | €643.52 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Volume pricing
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $588.73 | |
| ≥ 5 | $559.29 | −5 % |
Datasheets & documents
Specifications (automatically extracted)
Electrical
| Current max. | 13.2 A |
| Voltage | 12 V |
Mechanical
| Weight | 5 kg |
Environment
| Ip rating | IP65 |
Other characteristics
| Actual stroke length | 4.8 in |
| Current 12v no load | 2.4 A |
| Extended length | 20.67 in |
| Linear speed 12v max load | 0.56 in/s |
| Linear speed 12v no load | 0.66 in/s |
| Max linear force 12v | 1 000 lb |
| Maximum duty cycle | 25 % |
| Nominal stroke length | 6 in |
| Retracted length | 15.87 in |
| Stall current 12v | 50 A |
| Feedback potentiometer included | No |
| Gear ratio | 20:1 |
| Limit switches included | Yes |
| Maximum operating temperature | 65 °C |
| Minimum operating temperature | -25.0 °C |
| Overload clutch included | Yes |
| Screw type | ball |
Description
This 12 V industrial-duty (ID) linear actuator uses an efficient ball screw drive to lift loads up to 450 kgf [1000 lbs or 4500 N] and withstand static loads up to 1360 kgf [3000 lbs or 13,600 N]. It has a maximum speed of 16.8 mm/s [0.66″/s] at no load and 14.3 mm/s [0.56″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion, and an overload clutch protects the actuator from being damaged by excessive loads. The shaft holds its position when unpowered. This version has a 6-inch stroke (4.8″ usable) and no feedback potentiometer.
Similar products
PololuIn stock
99:1 Metal Gearmotor 25Dx69L mm HP 24V with 48 CPR Encoder
€49.46$56.95
View at seller ↗PololuIn stock
75:1 Metal Gearmotor 25Dx69L mm HP 24V with 48 CPR Encoder
€49.46$56.95
View at seller ↗PololuIn stock
47:1 Metal Gearmotor 25Dx67L mm HP 24V with 48 CPR Encoder
€49.46$56.95
View at seller ↗PololuIn stock
34:1 Metal Gearmotor 25Dx67L mm HP 24V with 48 CPR Encoder
€49.46$56.95
View at seller ↗