PololuConcentric· Motors & actuators
Listed by Pololu at €200.62. Delivered to France, including shipping, VAT and any customs duty, it comes to about €270.74. Prices last checked on 2026-09-29.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €200.62 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €45.12 |
| Total delivered | €270.74 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Qty | Unit price | Saving |
|---|---|---|
| ≥ 1 | $228.27 | |
| ≥ 5 | $216.86 | −5 % |
| Current max. | 3.4 A |
| Voltage | 12 V |
| Weight | 1.43 kg |
| Ip rating | IP65 |
| Actual stroke length | 9.84 in |
| Current 12v no load | 1.1 A |
| Extended length | 25.55 in |
| Linear speed 12v max load | 2.9 in/s |
| Linear speed 12v no load | 3.3 in/s |
| Max linear force 12v | 27 lb |
| Maximum duty cycle | 25 % |
| Nominal stroke length | 10 in |
| Retracted length | 15.71 in |
This 12 V high-speed light-duty (LD) linear actuator with a 5:1 gear reduction can lift loads up to 12 kgf [27 lbs or 120 N] and can withstand static loads up to 30 kgf [67 lbs or 300 N]. It has a maximum speed of 84 mm/s [3.3″/s] at no load and 75 mm/s [2.9″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion. The shaft holds its position when unpowered. This version has a 10-inch stroke (9.8″ usable) and a feedback potentiometer that lets you determine where the actuator is in its stroke.
Semantically close products available for less — check the specs match your need.
| Stall current 12v | 7 A |
| Feedback potentiometer included | Yes |
| Gear ratio | 5:1 |
| Limit switches included | Yes |
| Maximum operating temperature | 65 °C |
| Minimum operating temperature | -25.0 °C |
