MÄDLERMÄDLER· Mechanics & transmission
Manufacturer part no. 28303200
Listed by MÄDLER at €4.09. Delivered to France, including shipping, VAT and any customs duty, it comes to about €22.91. Prices last checked on 2026-08-07.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €4.09 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €3.82 |
| Total delivered | €22.91 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 11.6 g |
| Bore bh9 mm | 6 mm |
| Hub diameter | 18 mm |
| Max torque | 79 Ncm |
| Module | 1 |
| No of teeth | 32 |
| Outer diameter | 34 mm |
| Pitch circle diameter | 32 mm |
| Tooth width | 9 mm |
| Material | Plastic die-cast (Polyacetal, up to 80°C) |
| Surface | Blank |
Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality.
Semantically close products available for less — check the specs match your need.