MÄDLERMÄDLER· Mechanics & transmission
Bevel gear made of brass Ms58 module 1 30 teeth i=1:1 milled
Manufacturer part no. 35052000
Manufacturer part no. 35052000
Listed by MÄDLER at €37.26. Delivered to France, including shipping, VAT and any customs duty, it comes to about €62.71. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €37.26 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €10.45 |
| Total delivered | €62.71 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 33 g |
| Bore | 5 mm |
| Max torque | 40 Ncm |
| Module | 1 |
| No of teeth | 30 |
| Optional counter wheel part no | 35 052 000 |
| Outer diameter | 31.4 mm |
| Tooth quality | 8 |
| Material | Brass (Ms58) |
| Ratio | 1:1 (30/30) |
| Surface | Blank |
Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
Semantically close products available for less — check the specs match your need.