MÄDLERMÄDLER· Mechanics & transmission
Bevel gear made of polyketone die-cast module 3 15 teeth i=2:1 bore 14mm
Manufacturer part no.
Manufacturer part no.
Listed by MÄDLER at €10.18. Delivered to France, including shipping, VAT and any customs duty, it comes to about €30.22. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €10.18 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €5.04 |
| Total delivered | €30.22 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 34.1 g |
| Max torque | 389 Ncm |
| Module | 3 |
| No of teeth | 15 |
| Optional counter wheel part no | 35 645 701 |
| Outer diameter | 50.3 mm |
| Material | Plastic die-cast (Polyketone, up to 140°C) |
| Ratio | 2:1 (15/30) |
| Surface | Blank |
Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
Semantically close products available for less — check the specs match your need.
