MÄDLERMÄDLER· Mechanics & transmission
Bevel gear made of stainless steel 1.4305 module 1.5 30 teeth i=2:1
Manufacturer part no.
Manufacturer part no.
Listed by MÄDLER at €66.75. Delivered to France, including shipping, VAT and any customs duty, it comes to about €98.10. Prices last checked on 2026-10-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €66.75 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €16.35 |
| Total delivered | €98.10 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
2 price/stock records since 8/4/2026
| Weight | 124 g |
| Bore | 10 mm |
| Max torque | 0.54 Nm |
| Module | 1.5 |
| No of teeth | 30 |
| Optional counter wheel part no | 36 099 756 |
| Outer diameter | 45.9 mm |
| Tooth quality | 8 |
| Material | Stainless steel (303) |
| Ratio | 2:1 (15/30) |
| Surface | Blank |
Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
Semantically close products available for less — check the specs match your need.