MÄDLERMÄDLER· Mechanics & transmission
Bevel gear made of steel module 2.5 60 teeth i=4:1 milled
Manufacturer part no. 36119300
Manufacturer part no. 36119300
Listed by MÄDLER at €196.46. Delivered to France, including shipping, VAT and any customs duty, it comes to about €253.75. Prices last checked on 2026-10-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €196.46 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €42.29 |
| Total delivered | €253.75 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 2.6 kg |
| Bore | 25 mm |
| Max torque | 21.2 Nm |
| Module | 2.5 |
| No of teeth | 60 |
| Optional counter wheel part no | 36 119 200 |
| Outer diameter | 151.2 mm |
| Tooth quality | 8 |
| Material | Steel (1045) |
| Ratio | 4:1 (15/60) |
| Surface | Blank |
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Semantically close products available for less — check the specs match your need.
