MÄDLERMÄDLER· Mechanics & transmission
Bevel gear made of steel module 3 45 teeth i=2.5:1 milled
Manufacturer part no. 36146900
Manufacturer part no. 36146900
Listed by MÄDLER at €149.12. Delivered to France, including shipping, VAT and any customs duty, it comes to about €196.94. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €149.12 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €32.82 |
| Total delivered | €196.94 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 1.9 kg |
| Bore | 30 mm |
| Max torque | 32 Nm |
| Module | 3 |
| No of teeth | 45 |
| Optional counter wheel part no | 36 146 800 |
| Outer diameter | 137.7 mm |
| Tooth quality | 8 |
| Material | Steel (1045) |
| Ratio | 2.5:1 (18/45) |
| Surface | Blank |
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Semantically close products available for less — check the specs match your need.
