MÄDLERMÄDLER· Bevel Gears, Worm Wheels, Worms
Bevel gear made of stainless steel 1.4305 module 3 15 teeth i=4:1
Manufacturer part no. 36199492
$124.26≈ 107.91 €
In stock — 2 unitslead time 14 d
Estimated landed cost
| Item | €107.91 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €24.58 |
| Total delivered | €147.49 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 270 g |
Other characteristics
| Bore | 10 mm |
| Max torque | 4.4 Nm |
| Module | 3 |
| No of teeth | 15 |
| Optional counter wheel part no | 36 199 493 |
| Outer diameter | 51 mm |
| Tooth quality | 8 |
| Material | Stainless steel (303) |
| Ratio | 4:1 (15/60) |
| Surface | Blank |
Description
Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
Similar products
MÄDLERIn stock
Bevel gear set spiral toothed module 3.5, number of teeth 9/27 i=3 :1 material steel 16MnCr5 teeth hardened
€987.71$1137.35
View at seller ↗
MÄDLERIn stock
Bevel gear set spiral toothed module 3.6 number of teeth 9/23 i=2.555..:1 material steel 16MnCr5 teeth hardened
€1111.78$1280.22
View at seller ↗MÄDLERIn stock
Bevel gear set spiral toothed module 3 number of teeth 16/24 i=1.5:1 material steel 16MnCr5 teeth hardened
€771.12$887.95
View at seller ↗
MÄDLERIn stock
Bevel gear set spiral toothed module 3 number of teeth 21/21 i=1:1 material steel 16MnCr5 teeth hardened
€705.58$812.47
View at seller ↗