MÄDLERMÄDLER
Manufacturer part no. 40010005
Listed by MÄDLER at €693.02. Delivered to France, including shipping, VAT and any customs duty, it comes to about €849.62. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €693.02 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €141.60 |
| Total delivered | €849.62 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Haldex 40010005 40910662 Auto Brake Slack Adjuster 10 Spline 1.5in 5.5in
New · sold by mskindustrialservices · ships from US
Imported from outside the EU — duties and VAT included in the delivered cost; customs formalities and delays are not
€124.68
billed $139.95
€127.63 delivered
Westermo UNICONTROL-S-RS-232/VIA IBS > RS 232 40010005 Converter -used-
Used · sold by maaslos-gut_de · ships from DE
€98.16
billed $110.19
€128.05 delivered
Third-party listings on eBay, matched to this product by its part number or title. Robotitem neither sells nor warrants these items: condition, stock and lead times are the seller's, and a listing disappears once sold. Delivered cost includes the seller's actual shipping.
| Weight | 6.5 kg |
| N2 at n1 1380min min. | 362 |
| P at n1 1380 min 1 kw | 1.27 |
| T2 at fb 1 nm | 31.8 |
| Transmission | 3.81 |
Casing: Cast iron casing with thick walls and ribbed construction, sealed against oil leaks and dust. Gears: Special steel, extremely hard wearing and case hardened. Smooth-running helical gear wheels with ground or scraped tooth profiles. Bearing: Generously dimensioned bearings as standard version (heavy-duty bearings for higher overhung or thrust loads available at extra cost) Lubrication: The gear boxes are delivered ready for work, filled with the correct level of oil or grease, which offers sufficient lubrication for about 10.000 operation hours, or for an operation period of max. 2 years, at a temperature of -30 to +80°C. Before start up, the plastic plug must be taken out of the venting screw, otherwise excess pressure will build up inside the gearbox.