MÄDLERMÄDLER· Motors & actuators
Bevel gearbox DZA, size 3, type B, i=2:1
Manufacturer part no. 41002402
$408.30
Manufacturer part no. 41002402
Listed by MÄDLER at €363.74. Delivered to France, including shipping, VAT and any customs duty, it comes to about €454.49. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €363.74 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €75.75 |
| Total delivered | €454.49 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
41002402 - MADLER - 41002402 / Réducteur à engrenage conique USED
Used · sold by rei-industry · ships from FR
€180.00
€204.00 delivered
Third-party listings on eBay, matched to this product by its part number or title. Robotitem neither sells nor warrants these items: condition, stock and lead times are the seller's, and a listing disappears once sold. Delivered cost includes the seller's actual shipping.
| Torque | 265.122 kg·cm |
| Weight | 3.89 kg |
| Shaftdiameter | 20 mm |
| Size | 3 |
| Ratio | 2 : 1 |
General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0.
Semantically close products available for less — check the specs match your need.
