Servo worm gear unit ZM/S size 80 i=16:1 output shaft with shrink disk side 6

MÄDLERMÄDLER· Motors & actuators

Servo worm gear unit ZM/S size 80 i=16:1 output shaft with shrink disk side 6

Name: Servo worm gear unit ZM/S size 80 i=16:1 output shaft with shrink disk side 6
Brand: MÄDLER
Price: 2352.01 USD
Availability: BackOrder

Manufacturer part no. 42108109

$2352.01≈ 2037.78 €

Price summary

Listed by MÄDLER at €2037.78. Delivered to France, including shipping, VAT and any customs duty, it comes to about €2463.34. Prices last checked on 2026-08-07.

Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.

On backorderlead time 56 d

View at seller ↗

Estimated landed cost

Landed cost breakdown
Item	€2037.78
Shipping	€15.00
VAT (20%)	€410.56
Total delivered	€2463.34

Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.

Datasheets & documents

Specifications (automatically extracted)

Other characteristics

Backlash constant torque	541 Nm
Level of efficiency	92 %
Max output torque	1 567 Nm
Maximum acceleration torque output	740 Nm
Permittable input torque	30.9 Nm
Permittable output torque permanent t2 zul 1 3	455 Nm
Size	80
Torsional stiffness	86 Nm/arcmin
Input speed max.	4500 min-1
Ratio	16.0 : 1

Description

These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application. General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C. Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides. Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Self-locking: The servo worm gear unit isn‘t self-locking. Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force. Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required. Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated. Delivery: 2 products have to be ordered: – the servo worm gear unit with shrink disc on the output side 5 or 6. – the motor adaptation with coupling, flange and fixing screws. 1) permittable output torque T2 zul. under consideration of thermal limits. 2) maximum output torque T2 max. without co