

Manufacturer part no.
Listed by MÄDLER at €145.38. Delivered to France, including shipping, VAT and any customs duty, it comes to about €192.46. Prices last checked on 2026-08-07.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €145.38 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €32.08 |
| Total delivered | €192.46 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Voltage | 24 V |
| Weight | 300 g |
| Max current | 1.6 A |
| Max torque | 0.7 Nm |
| Nominal torque | 0.12 Nm |
| Nominal voltage | 24 V |
| Number of gear stages | 1 |
| Idle speed | 480 min-1 |
| Nominal speed | 440 min-1 |
| Ratio | 7.5.1 |
Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic. Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x … ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request.
Semantically close products available for less — check the specs match your need.





