Manufacturer part no. 43903725
Listed by MÄDLER at €747.63. Delivered to France, including shipping, VAT and any customs duty, it comes to about €915.16. Prices last checked on 2026-08-07.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €747.63 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €152.53 |
| Total delivered | €915.16 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Power | 370 W |
| Voltage | 400 V |
| Weight | 12 kg |
| Gearbox size | 63 |
| Max output torque | 62 Nm |
| Operating facor | 2.3 |
| Optional doublesided output shaft partno | 43 806 200 |
| Optional onesided output shaft partno | 43 806 100 |
| Optional output flange round parto | 43 906 400 |
| Optional output flange square parto | 43 906 300 |
| Ratio total | 36 |
| Motor size | 71B4 |
| Output speed | 38.9 min-1 |
Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round).
Semantically close products available for less — check the specs match your need.